Chat with us, powered by LiveChat
sma connector

Brass Vs Stainless Steel SMA Connectors

Bryan Benjamin

8 Posts



The SMA can be constructed with either Brass of Stainless Steel mass. Initially SMA’s were almost always stainless steel; for military employments, stainless steel is usually called out. A key difference between the 2 substances is the torque are needed for proper mating; an sma torque strain for stainless steel adapters requires about 8 in-lbs torque; brass sma’s are stiffened to 5 in-lbs; employing an 8 in-lb torque strain on a brass sma will change the head of the connector off.

High quality SMA Connectors are generally built to the relevant US mil-specs, which call out Teflon dielectric information, BeCu contacts,& 50 microinches minimum amber plating on the contacts. Brass sma’s, often targeting commercial-grade lotions with least severe homes& lower cost marketplaces, may replace plastic instead of Teflon; brass contacts instead of BeCu; and either 30 microinches, 10 microinches, or 3 microinches of golden plating on the contacts. The best SMA’s can work to 27 gHz; some extremely inexpensive editions work to only 3gHz.

For coaxial attenuators, an SMA attenuator can be either stainless steel or brass; likewise an SMA adapter can be of either textile. Resolving which material is suitable,& which torque wrench to implementation, is essential in choosing the correct proportion for the purposes of an application. SMA cables too come in both materials.

Coaxial adapters, use an SMA on one or either port likewise can be either brass or information. Use a stainless if unsure of what is necessary; use a brass persona if it fits with the rest of information systems,& you know brass is appropriate for your lotion. Always check for the appropriate torque setiing; unlike N’s and TNC’s, SMA necessitate suitable torque.

Leave a Reply

Your email address will not be published. Required fields are marked *

Select your currency
AED United Arab Emirates dirham